Crushing of industrial and hazardous wastes

Burning problems of uncrushed materials:

1. The material is too large and too long, and the feed size is larger than the kiln mouth size, so it cannot be burned in the kiln;

2. Insufficient incineration of large materials into the kiln, reducing the incineration efficiency;

Yuzhuo solution:

One stop elevator + crusher + fire fighting system equipment. Solve the problem of pretreatment before incineration, realize the uniformity of material particle size, and facilitate the transportation and incineration of subsequent materials.

Detailed material:

① Break large pieces of material into small pieces

② Solve the problem that large materials cannot be fed and blocked.

Convenient material transportation:

① Uniform material size after crushing

② Convenient for grab or conveyor conveying

③ It is convenient for mixing and conveying of rear mixer and solid pump

Characteristics of hazardous waste crushing system

※ driven by imported hydraulic system, it can crush full barrels of materials.

※ imported hydraulic components are adopted, and the maximum working pressure is 35MPa.

※ automatic overload protection to protect key components from damage.

※ European imported cutting tools, broken metal does not break.

※ the tool can be repaired by surfacing to reduce the use cost.

※ the bearing has four seals, which is suitable for complex working conditions.

※ automatic fire fighting system to ensure the safe operation of the system.

※ repair the displacement guide rail to ensure the safety of workers repairing the cutter box.

※ hydraulic discharge door to reduce the labor intensity of workers.

※ the hydraulic press can crush hard materials without slipping.

※ Siemens Schneider components ensure the stability of equipment operation.